Is Total Uptime down?

Over the last 90 days, Total Uptime reported 99.71% uptime on its official status page. That figure is calculated from the public incident timeline at https://totaluptimestatus.com — each minute of degraded, partial-outage, or major-outage status counts against the total. Sign up to Pingoru free to see Total Uptime's uptime history rolling forward in real time.

Yes — Total Uptime has had 3 incidents reported on its official status page so far in 2026. The full timeline (start times, durations, components affected) is shown above on this page. Pingoru re-checks the status page every 5 minutes so the count stays current.

The most recent Total Uptime incident was "Under Maintenance detected on status page", which started on April 19, 2026 and was resolved on April 20, 2026. Pingoru captured this directly from https://totaluptimestatus.com. See the full incident card above for affected components and the update timeline.

Based on the last 90 days, Total Uptime averages 1.0 reported incident per month on its official status page. Pingoru tracks each one with start time, duration, severity, and affected components — so you can see the pattern at a glance instead of digging through the vendor's archive.

Total Uptime's official status page is https://totaluptimestatus.com. Pingoru polls it every 5 minutes and renders the same data here, alongside every other cloud or SaaS provider you depend on — so you can spot multi-vendor incidents (e.g. AWS + Stripe + Cloudflare degrading at the same minute) without flipping between tabs.

Total Uptime is having a partial outage. Pingoru checks the official status page every 5 minutes and flips this headline the moment Total Uptime reports a change. Current status is based on 19 tracked services.

We read https://totaluptimestatus.com directly, using Total Uptime's own status page. If the vendor reports an incident, you see it within one check cycle — not after someone manually marks the page as down.

Create a free Pingoru account and add Total Uptime as a monitor. You can filter to specific services, pick severity thresholds, and route alerts via email, Slack, Discord, or a webhook.

Three common reasons: • A real Total Uptime incident that hasn't been acknowledged on their public status page yet — vendor status pages are updated manually and typically lag the first customer reports by 10–30 minutes. • A regional or account-scoped issue affecting a subset of customers — these rarely trigger a global status-page change. • A local problem: ISP / DNS / your own software. Try reproducing from a mobile data connection and from a different network to isolate. If you suspect a real Total Uptime issue that isn't reflected yet, contact their support to escalate. Subscribing here means you get the alert the moment they do post an update.

We use Total Uptime's own status page at https://totaluptimestatus.com and cross-reference their homepage (https://totaluptimestatus.com). Nothing is read in a way the vendor hasn't explicitly made public — we use the same data their own dashboard uses. So our data is as accurate as what you'd see loading the status page yourself, but rolled into one dashboard alongside every other service you depend on.

Total Uptime has a partial outage — one or more components are down, but the rest of the service is operational.