Question 1

What is MSP360's uptime?

Accepted Answer

Over the last 90 days, MSP360 reported 99.88% uptime on its official status page. That figure is calculated from the public incident timeline at https://status.mspbackups.com — each minute of degraded, partial-outage, or major-outage status counts against the total. Sign up to Pingoru free to see MSP360's uptime history rolling forward in real time.

Question 2

Has MSP360 had outages in 2026?

Accepted Answer

Yes — MSP360 has had 1 incident reported on its official status page so far in 2026. The full timeline (start times, durations, components affected) is shown above on this page. Pingoru re-checks the status page every 5 minutes so the count stays current.

Question 3

When was the last MSP360 outage?

Accepted Answer

The most recent MSP360 incident was "Partial Outage detected on status page", which started on April 19, 2026 and was resolved on April 20, 2026. Pingoru captured this directly from https://status.mspbackups.com. See the full incident card above for affected components and the update timeline.

Question 4

How often does MSP360 have outages?

Accepted Answer

Based on the last 90 days, MSP360 averages 0.3 reported incident per month on its official status page. Pingoru tracks each one with start time, duration, severity, and affected components — so you can see the pattern at a glance instead of digging through the vendor's archive.

Question 5

Where is MSP360's status page?

Accepted Answer

MSP360's official status page is https://status.mspbackups.com. Pingoru polls it every 5 minutes and renders the same data here, alongside every other cloud or SaaS provider you depend on — so you can spot multi-vendor incidents (e.g. AWS + Stripe + Cloudflare degrading at the same minute) without flipping between tabs.

Question 6

Is MSP360 down right now?

Accepted Answer

MSP360 is up. Pingoru checks the official status page every 5 minutes and flips this headline the moment MSP360 reports a change. Current status is based on 18 tracked services.

Question 7

How does Pingoru know if MSP360 is down?

Accepted Answer

We read https://status.mspbackups.com directly, using MSP360's own status page. If the vendor reports an incident, you see it within one check cycle — not after someone manually marks the page as down.

Question 8

Where can I get notified when MSP360 has an outage?

Accepted Answer

Create a free Pingoru account and add MSP360 as a monitor. You can filter to specific services, pick severity thresholds, and route alerts via email, Slack, Discord, or a webhook.

Question 9

MSP360's status page says the service is up, but I'm having issues — what's wrong?

Accepted Answer

Three common reasons:

• A real MSP360 incident that hasn't been acknowledged on their public status page yet — vendor status pages are updated manually and typically lag the first customer reports by 10–30 minutes.
• A regional or account-scoped issue affecting a subset of customers — these rarely trigger a global status-page change.
• A local problem: ISP / DNS / your own software. Try reproducing from a mobile data connection and from a different network to isolate.

If you suspect a real MSP360 issue that isn't reflected yet, contact their support to escalate. Subscribing here means you get the alert the moment they do post an update.

Question 10

Where does Pingoru get the official MSP360 status?

Accepted Answer

We use MSP360's own status page at https://status.mspbackups.com and cross-reference their homepage (https://www.msp360.com). Nothing is read in a way the vendor hasn't explicitly made public — we use the same data their own dashboard uses. So our data is as accurate as what you'd see loading the status page yourself, but rolled into one dashboard alongside every other service you depend on.

Question 11

What does "Up" mean?

Accepted Answer

All tracked MSP360 components are reporting operational. No incidents are currently affecting service.

Is MSP360 down?

Recent outages & incidents

Outage history