smapOne had 8 outages in the last 2 years totaling 108h 53m of downtime — averaging 0.3 incidents per month.
There were 8 smapOne outages since June 2, 2025 totaling 108h 53m of downtime. Each is summarised below — incident details, duration, and resolution information.
The smapOne platform has a partial outage. We are working on the solution and we will inform you here as soon as the platform is fully available again.
The smapOne platform is still available. We had a small performance spike by deploying a new version.
Yesterday evening, our platform experienced an outage that resulted in a service disruption of approximately 60 minutes. During this time, the platform was not accessible. In addition, email notifications and webhooks were partially impacted and operated with limitations until approximately 09:00 this morning. The issue has now been fully resolved, and all systems are operating normally again. The root cause was identified as an error in the network configuration of a central system component. Our team has corrected the configuration and taken steps to prevent similar issues in the future. We sincerely apologize for the inconvenience this incident may have caused and appreciate your patience while we worked to restore full service.
The smapOne webapp has an outage. We are working on the solution and we will inform you here as soon as it is fully available again.
The smapOne WebApp is available again.
We are currently experiencing an issue opening drafts and tasks from some smaps in the smapOne app. We are currently investigating the problem and looking for a solution.
The problem has been identified and a bug fix is being developed. A new version of smapOne will be uploaded to the stores later today.
The bug fix has been created and the new version has been uploaded to the respective stores. As soon as the version has been successfully checked by the stores, the new versions will be available for download.
Bugfix is now on all platforms ready for download.
Derzeit untersuchen wir Meldungen, dass die smapOne Plattform nicht mehr zu erreichen ist. Erste Ergebnisse liefern ebenfalls Informationen, dass Microsoft Azure auch Störungen meldet. Wir untersuchen die Zusammenhänge und halten Sie auf dem Laufenden.
Die Ursache ist ein Fehler in den Microsoft-Systemen. Microsoft ist an einer Lösung dran. Weitere Infos gibt es unter https://azure.status.microsoft/de-de/status
Microsoft ist dabei die Änderungen an ihrer Infrastruktur zurückzurollen und erwartet, dass die Systeme innerhalb der nächsten 3,5 Stunden wieder lauffähig sind. Uns erreichen inzwischen Berichte, dass smapOne von manchen Nutzern wieder erreicht werden kann. Wir informieren, sobald wir mehr wissen oder wieder normal verfügbar sind.
Unsere Monitorigdaten deuten darauf hin, dass die smapOne-Umgebung wieder weitestgehend normal erreichbar ist. Die Menge an Anfrage ist wieder in gewohnten Bereich. Selten schlagen noch Anfragen fehl, diese sollten aber bei einem erneuten Versuch funktionieren. Da Microsoft laut ihrer Statuspage den Fehler noch nicht vollständig behoben hat, beobachten wir weiterhin die Situation.
Der Fehler wurde behoben. Die smapOne steht wieder normal zur Verfügung.
Following a major update to our Code Scanner software, some barcodes are no longer being read correctly. In addition, a few devices are crashing. We are currently working on identifying and fixing the problem.
Fix for code scanner brick is live in iOS and Android with AppVersion 25.9.22
We've detected issues in sending data and forwarding tasks. We're currently investigating and will solve the issues as soon as possible.
We've found the issue and will solve it in the next appr. 10 minutes.
We've found the issue and will solve it in the next appr. 10 minutes.
This incident has been resolved.