Is Broadcom Web Isolation down?

Over the last 90 days, Broadcom Web Isolation reported 99.49% uptime on its official status page. That figure is calculated from the public incident timeline at https://status.broadcom.com/services/web-isolation — each minute of degraded, partial-outage, or major-outage status counts against the total. Sign up to Pingoru free to see Broadcom Web Isolation's uptime history rolling forward in real time.

Yes — Broadcom Web Isolation has had 28 incidents reported on its official status page so far in 2026. The full timeline (start times, durations, components affected) is shown above on this page. Pingoru re-checks the status page every 5 minutes so the count stays current.

The most recent Broadcom Web Isolation incident was "Reporting Infrastructure Maintenance (APAC Region) April 28, 2026", which started on April 28, 2026 and was resolved on April 28, 2026. Pingoru captured this directly from https://status.broadcom.com/services/web-isolation. See the full incident card above for affected components and the update timeline.

Based on the last 90 days, Broadcom Web Isolation averages 9.3 reported incidents per month on its official status page. Pingoru tracks each one with start time, duration, severity, and affected components — so you can see the pattern at a glance instead of digging through the vendor's archive.

Broadcom Web Isolation's official status page is https://status.broadcom.com/services/web-isolation. Pingoru polls it every 5 minutes and renders the same data here, alongside every other cloud or SaaS provider you depend on — so you can spot multi-vendor incidents (e.g. AWS + Stripe + Cloudflare degrading at the same minute) without flipping between tabs.

Broadcom Web Isolation is up. Pingoru checks the official status page every 5 minutes and flips this headline the moment Broadcom Web Isolation reports a change. Current status is based on 25 tracked services.

We read https://status.broadcom.com/services/web-isolation directly, using Broadcom Web Isolation's own status page. If the vendor reports an incident, you see it within one check cycle — not after someone manually marks the page as down.

Create a free Pingoru account and add Broadcom Web Isolation as a monitor. You can filter to specific services, pick severity thresholds, and route alerts via email, Slack, Discord, or a webhook.

Three common reasons: • A real Broadcom Web Isolation incident that hasn't been acknowledged on their public status page yet — vendor status pages are updated manually and typically lag the first customer reports by 10–30 minutes. • A regional or account-scoped issue affecting a subset of customers — these rarely trigger a global status-page change. • A local problem: ISP / DNS / your own software. Try reproducing from a mobile data connection and from a different network to isolate. If you suspect a real Broadcom Web Isolation issue that isn't reflected yet, contact their support to escalate. Subscribing here means you get the alert the moment they do post an update.

We use Broadcom Web Isolation's own status page at https://status.broadcom.com/services/web-isolation and cross-reference their homepage (https://www.broadcom.com/products/cybersecurity/network/network-protection/web-isolation). Nothing is read in a way the vendor hasn't explicitly made public — we use the same data their own dashboard uses. So our data is as accurate as what you'd see loading the status page yourself, but rolled into one dashboard alongside every other service you depend on.

All tracked Broadcom Web Isolation components are reporting operational. No incidents are currently affecting service.