What is Datadog EU's uptime?

Over the last 90 days, Datadog EU reported 98.63% uptime on its official status page. That figure is calculated from the public incident timeline at https://status.datadoghq.eu, each minute of degraded, partial-outage, or major-outage status counts against the total. Sign up to Pingoru free to see Datadog EU's uptime history rolling forward in real time.

Has Datadog EU had outages in 2026?

Yes, Datadog EU has had 10 incidents reported on its official status page so far in 2026. The full timeline (start times, durations, components affected) is shown above on this page. Pingoru re-checks the status page every 5 minutes so the count stays current.

When was the last Datadog EU outage?

The most recent Datadog EU incident was "The Datadog EU Status Page Is Changing on October 29 2026.", which started on October 29, 2026 and was resolved on October 29, 2026. Pingoru captured this directly from https://status.datadoghq.eu. See the full incident card above for affected components and the update timeline.

How often does Datadog EU have outages?

Based on the last 90 days, Datadog EU averages 3.3 reported incidents per month on its official status page. Pingoru tracks each one with start time, duration, severity, and affected components: so you can see the pattern at a glance instead of digging through the vendor's archive.

Where is Datadog EU's status page?

Datadog EU's official status page is https://status.datadoghq.eu. Pingoru polls it every 5 minutes and renders the same data here, alongside every other cloud or SaaS provider you depend on, so you can spot multi-vendor incidents (e.g. AWS + Stripe + Cloudflare degrading at the same minute) without flipping between tabs.

Is Datadog EU down right now?

Datadog EU is up. Pingoru checks the official status page every 5 minutes and flips this headline the moment Datadog EU reports a change. Current status is based on 39 tracked services.

How does Pingoru know if Datadog EU is down?

We read https://status.datadoghq.eu directly, using Datadog EU's own status page. If the vendor reports an incident, you see it within one check cycle, not after someone manually marks the page as down.

Where can I get notified when Datadog EU has an outage?

Create a free Pingoru account and add Datadog EU as a monitor. You can filter to specific services, pick severity thresholds, and route alerts via email, Slack, Discord, or a webhook.

Datadog EU's status page says the service is up, but I'm having issues. What's wrong?

Three common reasons: • A real Datadog EU incident that hasn't been acknowledged on their public status page yet, vendor status pages are updated manually and typically lag the first customer reports by 10–30 minutes. • A regional or account-scoped issue affecting a subset of customers. These rarely trigger a global status-page change. • A local problem: ISP / DNS / your own software. Try reproducing from a mobile data connection and from a different network to isolate. If you suspect a real Datadog EU issue that isn't reflected yet, contact their support to escalate. Subscribing here means you get the alert the moment they do post an update.

Where does Pingoru get the official Datadog EU status?

We use Datadog EU's own status page at https://status.datadoghq.eu. Nothing is read in a way the vendor hasn't explicitly made public. We use the same data their own dashboard uses. So our data is as accurate as what you'd see loading the status page yourself, but rolled into one dashboard alongside every other service you depend on.

All tracked Datadog EU components are reporting operational. No incidents are currently affecting service.

Is Datadog EU down?

Last checked just now

Current status

Datadog EU is up

No incidents right now.

Get alerts when Datadog EU breaks → View Datadog EU outage history →

Free, no credit card

Official status page: status.datadoghq.eu
Checked every 5 minutes
39 components tracked

Datadog EU is operational right now. Last checked just now; the most recent incident resolved 17h ago.

Real-time Datadog EU status, recent outages, and incident history: pulled directly from Datadog EU's official status page at status.datadoghq.eu every 5 minutes. Pingoru tracks 39 Datadog EU services and has captured 10 incidents in the last 90 days (98.63% uptime). Get email, Slack, Discord, or webhook alerts the moment Datadog EU reports a new incident, free for 3 monitors, no credit card.

Users who monitor Datadog EU also follow these DevOps services:

CloudAMQP View all 8,000+ providers

Datadog EU uptime 98.63% uptime · past 90 days

Mon Wed Fri

AugSepOct

Less More

Recent outages & incidents

Past 90 days

The issue is resolved since Oct 14, 2026 5:40 AM UTC During the incident: We are investigating elevated error rates for Synthetics UI. As a result of this issue, some users may see errors when creating a test from the UI, viewing test details, results, status and suites, as well as editing, pausing or resuming tests. Test executions, triggering tests from the API or CI, and alerting were not affected.

Resolved –

Started Oct 14, 2026, 03:30 PM UTC · Resolved Oct 14, 2026, 03:30 PM UTC
Timeline · 1 update
- resolved · Oct 27, 2026, 08:29 PM UTC
  
  The issue is resolved since Oct 14, 2026 5:40 AM UTC During the incident: We are investigating elevated error rates for Synthetics UI. As a result of this issue, some users may see errors when creating a test from the UI, viewing test details, results, status and suites, as well as editing, pausing or resuming tests. Test executions, triggering tests from the API or CI, and alerting were not affected.
Latest: The issue is resolved since Oct 14, 2026 5:40 AM UTC During the incident: We are investigating elevated error rates for Synthetics UI. As a result of this issue, some users may see…
Synthetics is degraded

Resolved –

Started Oct 13, 2026, 11:40 PM UTC · Resolved Oct 13, 2026, 11:40 PM UTC
Timeline · 1 update
- resolved · Oct 14, 2026, 03:30 PM UTC
  
  The issue is resolved since Oct 14, 2026 5:40 AM UTC During the incident: We are investigating elevated error rates for Synthetics UI. As a result of this issue, some users may see errors when creating a test from the UI, viewing test details, results, status and suites, as well as editing, pausing or resuming tests. Test executions, triggering tests from the API or CI, and alerting were not affected.
Latest: The issue is resolved since Oct 14, 2026 5:40 AM UTC During the incident: We are investigating elevated error rates for Synthetics UI. As a result of this issue, some users may see…
The issue is now resolved.

Resolved 6h

Started Oct 13, 2026, 11:40 PM UTC · Resolved Oct 14, 2026, 05:40 AM UTC

Synthetics
Timeline · 2 updates
- investigating · Oct 14, 2026, 01:39 PM UTC
  
  We are investigating elevated error rates for Synthetics UI. As a result of this issue, some users may see errors when creating a test from the UI, viewing test details, results, status and suites, as well as editing, pausing or resuming tests. Test executions, triggering tests from the API or CI, and alerting were not affected.
- resolved · Oct 14, 2026, 01:39 PM UTC
  
  The issue is now resolved.
Latest: The issue is now resolved.
Delayed processing affecting multiple product data and related alerts.

Resolved 5h 38m

Started Sep 18, 2026, 04:45 AM UTC · Resolved Sep 18, 2026, 10:24 AM UTC

APMCloud SIEMLog ManagementMetrics and Infra MonitoringMonitorsCloud Network MonitoringRUMSynthetics
Timeline · 14 updates
- investigating · Sep 18, 2026, 04:45 AM UTC
  
  We are investigating increased processing delays affecting some customers in our EU region. Customers may experience delays in the availability of product data and related alerts. Our teams are actively working to mitigate the issue and restore normal service. We will provide another update as more information becomes available.
- identified · Sep 18, 2026, 05:09 AM UTC
  
  We have identified the root cause of the increased processing delays of multiple products affecting some customers in our EU region. Our teams are actively working to mitigate the issue and restore normal service. We will provide another update as more information becomes available.
- identified · Sep 18, 2026, 05:12 AM UTC
  
  We have identified the root cause of the increased processing delays of multiple products affecting some customers in our EU region. Our teams are actively working to mitigate the issue and restore normal service. We will provide another update as more information becomes available. Recovery is seen for Metrics, Log Management, RUM, and Cloud SIEM.
- identified · Sep 18, 2026, 05:41 AM UTC
  
  We have identified the root cause of the increased processing delays of multiple products affecting some customers in our EU region. Our teams are actively working to mitigate the issue and restore normal service. We will provide another update as more information becomes available. APM is showing signs of recovery.
- investigating · Sep 18, 2026, 06:10 AM UTC
  
  We are investigating a new increase in processing delays affecting some customers in our EU region. Customers may experience delays in the availability of product data and related alerts. Our teams are actively working to mitigate the issue and restore normal service. We will provide another update as more information becomes available.
- identified · Sep 18, 2026, 07:11 AM UTC
  
  We have identified the root cause of the increased processing delays of multiple products affecting some customers in our EU region. Our teams are actively working to mitigate the issue and restore normal service. We will provide another update as more information becomes available.
- identified · Sep 18, 2026, 07:25 AM UTC
  
  We have identified that the delays in processing data for multiple products in EU1 are due to a networking issue with a third-party provider. Our engineering team is actively working on the issue. We will share another update as soon as we have one. We sincerely apologize for the disruption this is causing and greatly appreciate your patience while we work to resolve the issue.
- identified · Sep 18, 2026, 07:41 AM UTC
  
  We have identified that the delays in processing data for multiple products in EU1 are due to a networking issue with a third-party provider. Our engineering team is actively working on the issue. We will share another update as soon as we have one. We sincerely apologize for the disruption this is causing and greatly appreciate your patience while we work to resolve the issue.
- identified · Sep 18, 2026, 07:54 AM UTC
  
  We have identified that the delays in processing data for multiple products in EU1 are due to a networking issue with a third-party provider. Our engineering team is actively working on the issue. We have seen recovery for Log Management and RUM. Data is no longer delayed for these products and alerting is up to date and operational. We will share another update as soon as we have one. We sincerely apologize for the disruption this is causing and greatly appreciate your patience while we work to resolve the issue.
- identified · Sep 18, 2026, 08:10 AM UTC
  
  We have identified that the delays in processing data for multiple products in EU1 are due to a networking issue with a third-party provider. Our engineering team is actively working on the issue. We are seeing delays in Metrics queries, but recovery for APM and Cloud Network Monitoring. We will share another update as soon as we have one. We sincerely apologize for the disruption this is causing and greatly appreciate your patience while we work to resolve the issue.
- monitoring · Sep 18, 2026, 08:38 AM UTC
  
  We are monitoring the issue.
- monitoring · Sep 18, 2026, 09:00 AM UTC
  
  We are monitoring the issue. We are seeing increased latency for metric queries. Alerting is not impacted.
- monitoring · Sep 18, 2026, 09:27 AM UTC
  
  We are monitoring the issue. Query latency is back to the normal baseline for Metrics.
- resolved · Sep 18, 2026, 10:24 AM UTC
  
  The issue is now resolved.
Latest: The issue is now resolved.
The issue is now resolved.

Resolved 5h 38m

Started Sep 18, 2026, 04:45 AM UTC · Resolved Sep 18, 2026, 10:24 AM UTC

APMCloud Network MonitoringLog ManagementMetrics and Infra MonitoringMonitorsRUMSynthetics
Timeline · 14 updates
- investigating · Sep 18, 2026, 04:45 AM UTC
  
  We are investigating increased processing delays affecting some customers in our EU region. Customers may experience delays in the availability of product data and related alerts. Our teams are actively working to mitigate the issue and restore normal service. We will provide another update as more information becomes available.
- identified · Sep 18, 2026, 05:09 AM UTC
  
  We have identified the root cause of the increased processing delays of multiple products affecting some customers in our EU region. Our teams are actively working to mitigate the issue and restore normal service. We will provide another update as more information becomes available.
- identified · Sep 18, 2026, 05:12 AM UTC
  
  We have identified the root cause of the increased processing delays of multiple products affecting some customers in our EU region. Our teams are actively working to mitigate the issue and restore normal service. We will provide another update as more information becomes available. Recovery is seen for Metrics, Log Management, RUM, and Cloud SIEM.
- identified · Sep 18, 2026, 05:41 AM UTC
  
  We have identified the root cause of the increased processing delays of multiple products affecting some customers in our EU region. Our teams are actively working to mitigate the issue and restore normal service. We will provide another update as more information becomes available. APM is showing signs of recovery.
- investigating · Sep 18, 2026, 06:10 AM UTC
  
  We are investigating a new increase in processing delays affecting some customers in our EU region. Customers may experience delays in the availability of product data and related alerts. Our teams are actively working to mitigate the issue and restore normal service. We will provide another update as more information becomes available.
- identified · Sep 18, 2026, 07:11 AM UTC
  
  We have identified the root cause of the increased processing delays of multiple products affecting some customers in our EU region. Our teams are actively working to mitigate the issue and restore normal service. We will provide another update as more information becomes available.
- identified · Sep 18, 2026, 07:25 AM UTC
  
  We have identified that the delays in processing data for multiple products in EU1 are due to a networking issue with a third-party provider. Our engineering team is actively working on the issue. We will share another update as soon as we have one. We sincerely apologize for the disruption this is causing and greatly appreciate your patience while we work to resolve the issue.
- identified · Sep 18, 2026, 07:41 AM UTC
  
  We have identified that the delays in processing data for multiple products in EU1 are due to a networking issue with a third-party provider. Our engineering team is actively working on the issue. We will share another update as soon as we have one. We sincerely apologize for the disruption this is causing and greatly appreciate your patience while we work to resolve the issue.
- identified · Sep 18, 2026, 07:54 AM UTC
  
  We have identified that the delays in processing data for multiple products in EU1 are due to a networking issue with a third-party provider. Our engineering team is actively working on the issue. We have seen recovery for Log Management and RUM. Data is no longer delayed for these products and alerting is up to date and operational. We will share another update as soon as we have one. We sincerely apologize for the disruption this is causing and greatly appreciate your patience while we work to resolve the issue.
- identified · Sep 18, 2026, 08:10 AM UTC
  
  We have identified that the delays in processing data for multiple products in EU1 are due to a networking issue with a third-party provider. Our engineering team is actively working on the issue. We are seeing delays in Metrics queries, but recovery for APM and Cloud Network Monitoring. We will share another update as soon as we have one. We sincerely apologize for the disruption this is causing and greatly appreciate your patience while we work to resolve the issue.
- monitoring · Sep 18, 2026, 08:38 AM UTC
  
  We are monitoring the issue.
- monitoring · Sep 18, 2026, 09:00 AM UTC
  
  We are monitoring the issue. We are seeing increased latency for metric queries. Alerting is not impacted.
- monitoring · Sep 18, 2026, 09:27 AM UTC
  
  We are monitoring the issue. Query latency is back to the normal baseline for Metrics.
- resolved · Sep 18, 2026, 10:24 AM UTC
  
  The issue is now resolved.
Latest: The issue is now resolved.

See the full Datadog EU outage history

4 more incidents in the last 90 days, plus the full multi-year archive of per-service events and update timelines.

Browse Datadog EU outage history →

Or sign up free to get alerts when Datadog EU breaks · 10 free monitors · No credit card

Incident record

Since April 2026 · Datadog Statuspage · 39 components checked every 5 minutes

242incidents recorded

41last 12 months

9last 90 days

104 minutestypical duration, 12 months

The longest incident in the last year, The issue is now resolved. on October 13, 2026, ran for 6 hours. 1 maintenance window announced in the same period.

Most affected components, last 12 months

Monitors13
Monitors13
Metrics and Infra Monitoring9
Metrics and Infra Monitoring9
APM6

Latest incidents

The issue is resolved since Oct 14, 2026 5:40 AM UTC During the incident: We are investigating elevated error rates for Synthetics UI. As a result of this issue, some users may see errors when creating a test from the UI, viewing test details, results, status and suites, as well as editing, pausing or resuming tests. Test executions, triggering tests from the API or CI, and alerting were not affected. October 14, 2026 · under a minute · degraded service
The issue is resolved since Oct 14, 2026 5:40 AM UTC During the incident: We are investigating elevated error rates for Synthetics UI. As a result of this…
Synthetics is degraded October 13, 2026 · under a minute · notice
The issue is resolved since Oct 14, 2026 5:40 AM UTC During the incident: We are investigating elevated error rates for Synthetics UI. As a result of this…
The issue is now resolved. October 13, 2026 · 6 hours · degraded service
We are investigating elevated error rates for Synthetics UI. As a result of this issue, some users may see errors when creating a test from the UI, viewing…

Outage history

Past 90 days · 9 incidents View full outage history →

The issue is resolved since Oct 14, 2026 5:40 AM UTC During the incident: We are investigating elevated error rates for Synthetics UI. As a result of this issue, some users may see errors when creating a test from the UI, viewing test details, results, status and suites, as well as editing, pausing or resuming tests. Test executions, triggering tests from the API or CI, and alerting were not affected. Resolved

Started Oct 14, 2026, 03:30 PM UTC · Resolved Oct 14, 2026, 03:30 PM UTC · –
Synthetics is degraded Resolved

Started Oct 13, 2026, 11:40 PM UTC · Resolved Oct 13, 2026, 11:40 PM UTC · –
The issue is now resolved. Resolved

Started Oct 13, 2026, 11:40 PM UTC · Resolved Oct 14, 2026, 05:40 AM UTC · 6h
Delayed processing affecting multiple product data and related alerts. Resolved

Started Sep 18, 2026, 04:45 AM UTC · Resolved Sep 18, 2026, 10:24 AM UTC · 5h 38m
The issue is now resolved. Resolved

Started Sep 18, 2026, 04:45 AM UTC · Resolved Sep 18, 2026, 10:24 AM UTC · 5h 38m
Delayed Evaluation and delayed integration data Resolved

Started Sep 08, 2026, 08:25 PM UTC · Resolved Sep 08, 2026, 08:45 PM UTC · 20m
The issue is now resolved. Resolved

Started Sep 08, 2026, 08:25 PM UTC · Resolved Sep 08, 2026, 08:45 PM UTC · 20m
Delayed Distribution Metrics Resolved

Started Sep 08, 2026, 03:51 PM UTC · Resolved Sep 08, 2026, 04:05 PM UTC · 14m